Bernina USA website for #70/71 foot.

This is one of the feet Steve got me for Christmas. (I think I wrote down the wrong number when I gave him my list, I really wanted the #71 which is wider and for denim but I’m not complaining, I’ll buy that one myself and still get use out of this one.) This isn’t a foot I’ll use often but like so many Bernina feet, when you need it nothing else will do the job quite as well or as precisely.

I’ll show you step by step how to use this foot. Also the above link to the Bernina website has a great little video showing the foot in action.

Step 1: Align your fabric WRONG sides together with the bottom fabric 5mm beyond the edge of the top fabric.

Step 2:  Fold bottom fabric over edge of top fabric and place under the foot.

I use the point of my seam ripper to carefully poke the top corner of the folded fabric under the foot and needle. I then take a stitch or two and stop with my needle down to hold everything while I maneuver the folded edge of the fabric into the foot the way I want it.  

Sew down the seam keeping the bottom fabric folded over the raw edge of the top fabric.

The finished first seam. The raw edge of the top fabric is wrapped with the bottom fabric.

Step 3: Press seam and open it out, I don’t press it flat though. I find that it helps to get it under the needle and then take a few stitches and stop with the needle down so I can rearrange the fabric and get it placed in the foot properly. This also where having the Free Hand System (knee lift) comes in really handy!

Sew down the seam. The foot will fold the edge over and stitch exactly along the edge giving a perfectly top-stitched finish.

This sample was sewn with bright green in the needle and grey in the bobbin. This sample was sewn with bright green in both the needle and the bobbin. My bobbin stitching doesn’t look as perfect in this sample as the above one because I didn’t have it threaded perfectly. Usually the two rows of stitching will be exact and perfectly parallel like they are in the above sample.

The result is a perfectly finished seam with no raw edges. Where would you use this technique? This narrower one would be perfect for sewing side seams in lightweight blouses instead of a French seam. The advantage over a French seam is that this type lies flat. You see this seam finish in men’s dress shirts. This type of seam is very strong so it is good for seams that get a lot of stress. The most common use of a wider flat-fell seam is in denim jeans. I made a pair of stretch denim jeans for a store sample this fall and plan on making myself a pair soon so I will be going back and getting that #71 foot. I love the way this seam finish looks, so professional. I’m at the point in my sewing career that I want my home-sewn items to look as good if not better than store bought and this is just another way to achieve that goal.

At a later date I will share with you a couple short cuts you can use to achieve a flat-felled look in fewer steps and less time. Because we all know that I also like to get projects done fast!

Posted in Free Patterns/Tutorials, sewing | Show Comments | Add a Comment